 | Full size ANSI TYPE-2A cable compartment |
|
| Mini-padmount enclosures available through 25 KVA |
|
| Mini-pad available mounted to poly pad |
|
| Copper or aluminum primary conductor |
|
| Aluminum strip low-voltage winding |
|
| Externally clamped high voltage bushing wells |
|
| Bushing well inserts (available upon request) |
|
| Tri-mount epoxy low voltage bushings with threaded studs |
|
| Secondary Spade Terminals (availabe on request) |
|
| Electrostatically applied powder paint with a waterbased finish coat |
|
| Flush heavy duty stainless lifting bosses |
|
| Automatic pressure relief valve |
|
| Dual ground lugs |
|
| External tap changer handles |
|
| Aluminum nameplate with separate bar code label |
|
| High-voltage ratings through 25 KV |
|
| Sizes through 100 KVA |
|
| Low-voltage ratings through 600 V |
|
| Low-loss silicon steel cores |
|
| Thermally set Kraft paper insulation |
|
| High-dielectric strength oil |
|
| Bay-o-net fuse holder for removing transformer from service |
|
| Primary dual sensing fuse and isolation link |
|
| Stainless steel tanks and hardware (available on request) |
